View STPSC6H065G-TR_8086632.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

this is information on a product in full production. january 2014 docid023247 rev 5 1/14 stpsc6h065 650 v power schottky silicon carbide diode datasheet - production data features ? no reverse recovery charge in application current range ? switching behavior independent of temperature ? dedicated to pfc applications ? high forward surge capability ? insulated package to-220ac ins: ? insulated voltage: 2500 v rms ? typical package capacitance: 7 pf description the sic diode is an ultrahigh performance power schottky diode. it is manufactured using a silicon carbide substrate. the wide band gap material allows the design of a schottky diode structure with a 650 v rating. due to the schottky construction, no recovery is shown at turn-off and ringing patterns are negligible. the minimal capacitive turn-off behavior is independent of temperature. especially suited for use in pfc applications, this st sic diode will boost the performance in hard switching conditions. its high forward surge capability ensures a good robustness during transient phases. k k a k k a a nc nc k a k a to-220ac stpsc h065d 6 to-220ac ins stpsc h065d 6i dpak stpsc h065b-tr 6 dpak 2 stpsc h065 -tr 6g table 1. device summary symbol value i f(av) 6 a v rrm 650 v t j (max) 175 c www.st.com
characteristics stpsc6h065 2/14 docid023247 rev 5 1 characteristics to evaluate the conduction losses use the following equation: p = 1.35 x i f(av) + 0.192 x i f 2 (rms) table 2. absolute ratings (limiting values at 25 c unless otherwise specified) symbol parameter value unit v rrm repetitive peak reverse voltage 650 v i f(rms) forward rms current 22 a i f(av) average forward current to-220ac, dpak, d 2 pak, t c = 135 c (1) , dc 6 a to-220ac ins, t c = 110 c (1) , dc i fsm surge non repetitive forward current t p = 10 ms sinusoidal, t c = 25 c t p = 10 ms sinusoidal, t c = 125 c t p = 10 s square, t c = 25 c 60 52 400 a i frm repetitive peak forward current to-220ac, dpak, d 2 pak, t c = 135 c (1) , t j = 175 c, = 0.1 25 a to-220ac ins, t c = 110 c (1) , t j = 175 c, = 0.1 t stg storage temperature range -55 to +175 c t j operating junction temperature (2) -40 to +175 c 1. value based on r th(j-c) max. 2. condition to avoid thermal runaway for a diode on its own heatsink dptot dtj --------------- 1 rth j a ? () ------------------------- - < table 3. thermal resistance symbol parameter typ. value max. value unit r th(j-c) junction to case to-220ac, dpak, d 2 pak 1.6 2.4 c/w to-220ac ins 2.9 4.2 table 4. static electrical characteristics symbol parameter tests conditions min. typ. max. unit i r (1) reverse leakage current t j = 25 c v r = v rrm -560 a t j = 150 c - 50 250 v f (2) forward voltage drop t j = 25 c i f = 6 a -1.561.75 v t j = 150 c - 1.98 2.5 1. t p = 10 ms, < 2% 2. t p = 500 s, < 2%
docid023247 rev 5 3/14 stpsc6h065 characteristics 14 table 5. other parameters symbol parameter test conditions typ. unit q cj (1) total capacitive charge v r = 400 v 18 nc c j total capacitance v r = 0 v, t c = 25 c, f = 1 mhz 300 pf v r = 400 v, t c = 25 c, f = 1 mhz 30 1. most accurate value for the capacitive charge: q = c j (v r ).dv r cj v out 0 figure 1. forward voltage drop versus forward current (typical values, low level) figure 2. forward voltage drop versus forward current (typical values, high level) 0 2 4 6 8 10 12 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 t a =150 c t a =175 c t a =25 c pulse test : t p =500s t a =100 c a) i f ( v f (v) 0 10 20 30 40 50 60 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 t a =150 c t a =175 c t a =25 c pulse test : t p =500s t a =100 c a) i f ( v f (v) figure 3. reverse leakage current versus reverse voltage applied (typical values) figure 4. peak forward current versus case temperature (to-220ac, dpak, d 2 pak ) i r (a) 1.e-02 1.e-01 1.e+00 1.e+01 1.e+02 0 50 100 150 200 250 300 350 400 450 500 550 600 650 t j =25 c t j =150 c t j =175 c v r (v) i m (a) 0 10 20 30 40 50 60 70 0 25 50 75 100 125 150 175 = 0.1 = 0.3 = 0.5 = 1 = 0.7 t c (c) t =tp/t tp i m
characteristics stpsc6h065 4/14 docid023247 rev 5 figure 5. peak forward current versus case temperature (to-220ac ins) figure 6. junction capacitance versus reverse voltage applied (typical values) i m (a) 0 10 20 30 40 50 0 25 50 75 100 125 150 175 = 0.1 = 0.3 = 0.5 = 1 = 0.7 t c (c) t =tp/t tp i m 0 50 100 150 200 250 300 0.1 1.0 10.0 100.0 1000.0 f=1 mhz v osc =30 mv rms t j =25 c v r (v) c j (pf) figure 7. relative variation of thermal impedance junction to case versus pulse duration (to-220ac, dpak, d 2 pak) figure 8. relative variation of thermal impedance junction to case versus pulse duration (to-220ac ins) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.e-05 1.e-04 1.e-03 1.e-02 1.e-01 1.e+00 z th(j-c) /r th(j-c) single pulse t p (s) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.e-04 1.e-03 1.e-02 1.e-01 1.e+00 1.e+01 single pulse z th(j-c) /r th(j -c) t p (s) figure 9. non-repetitive peak surge forward current versus pulse duration (sinusoidal waveform) figure 10. total capacitive charges versus reverse voltage applied (typical values) 1.e+01 1.e+02 1.e+03 1.e-05 1.e-04 1.e-03 1.e-02 i fsm (a) t a =25 c t a =125 c t p (s) 0 4 8 12 16 20 0 50 100 150 200 250 300 350 400 q cj (nc) v r (v)
docid023247 rev 5 5/14 stpsc6h065 package information 14 2 package information ? epoxy meets ul94, v0 ? recommended torque value (to-220ac and to-220ac ins): 0.4 to 0.6 nm ? cooling method: conduction (c) in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. figure 11. to-220ac dimension definitions a c d l7 ? i l5 l6 l9 l4 f h2 g l2 f1 e m
package information stpsc6h065 6/14 docid023247 rev 5 table 6. to-220ac dimension values ref. dimensions millimeters inches min. max. min. max. a 4.40 4.60 0.173 0.181 c 1.23 1.32 0.048 0.051 d 2.40 2.72 0.094 0.107 e 0.49 0.70 0.019 0.027 f 0.61 0.88 0.024 0.034 f1 1.14 1.70 0.044 0.066 g 4.95 5.15 0.194 0.202 h2 10.00 10.40 0.393 0.409 l2 16.40 typ. 0.645 typ. l4 13.00 14.00 0.511 0.551 l5 2.65 2.95 0.104 0.116 l6 15.25 15.75 0.600 0.620 l7 6.20 6.60 0.244 0.259 l9 3.50 3.93 0.137 0.154 m 2.6 typ. 0.102 typ. diam. i 3.75 3.85 0.147 0.151
docid023247 rev 5 7/14 stpsc6h065 package information 14 figure 12. to-220ac ins dimension definitions c b2 c2 f ? i l a a1 a2 b e b1 i4 l2 c1 m
package information stpsc6h065 8/14 docid023247 rev 5 table 7. to-220ac ins dimension values ref. dimensions millimeters inches min. typ. max. min. typ. max. a 15.20 15.90 0.598 0.625 a1 3.75 0.147 a2 13.00 14.00 0.511 0.551 b 10.00 10.40 0.393 0.409 b1 0.61 0.88 0.024 0.034 b2 1.23 1.32 0.048 0.051 c 4.40 4.60 0.173 0.181 c1 0.49 0.70 0.019 0.027 c2 2.40 2.72 0.094 0.107 e 4.80 5.40 0.189 0.212 f 6.20 6.60 0.244 0.259 ?i 3.75 3.85 0.147 0.151 i4 15.80 16.40 16.80 0.622 0.646 0.661 l 2.65 2.95 0.104 0.116 l2 1.14 1.70 0.044 0.066 m 2.60 0.102
docid023247 rev 5 9/14 stpsc6h065 package information 14 figure 13. dpak dimension definitions l1 l a1 r r d d1 d c a c2 v2 a2 h l4 e1 e b l2 e b4 e1 gauge plane 0.25
package information stpsc6h065 10/14 docid023247 rev 5 figure 14. footprint (dimensions in mm) table 8. dpak dimension values ref. dimensions millimeters inches min. typ. max. min. typ. max. a 2.20 2.40 0.086 0.094 a1 0.90 1.10 0.035 0.043 a2 0.03 0.23 0.001 0.009 b 0.64 0.90 0.025 0.035 b4 5.20 5.40 0.204 0.212 c 0.45 0.60 0.017 0.023 c2 0.48 0.60 0.018 0.023 d 6.00 6.20 0.236 0.244 d1 5.10 0.201 e 6.40 6.60 0.251 0.259 e1 4.70 0.185 e2.28 0.090 e1 4.40 4.60 0.173 0.181 h 9.35 10.10 0.368 0.397 l 1.00 1.50 0.039 0.059 l1 2.80 0.11 l2 0.80 0.032 l4 0.60 1.00 0.023 0.039 r0.2 0.008 v2 0 8 0 8 6.3 6.1 10.7 2.8 1.5 4.572 a b this footprint ensures insultation up to 630 v rms (according to iec 664-1) the device must be positioned within 0.05 a b
docid023247 rev 5 11/14 stpsc6h065 package information 14 figure 15. d 2 pak dimension definitions g l l3 l2 b b2 e * flat zone no less than 2mm a c2 d r a2 m v2 c a1 *
package information stpsc6h065 12/14 docid023247 rev 5 figure 16. d 2 pak footprint (dimensions in mm) table 9. d 2 pak dimension values ref. dimensions millimeters inches min. max. min. max. a 4.40 4.60 0.173 0.181 a1 2.49 2.69 0.098 0.106 a2 0.03 0.23 0.001 0.009 b 0.70 0.93 0.027 0.037 b2 1.14 1.70 0.045 0.067 c 0.45 0.60 0.017 0.024 c2 1.23 1.36 0.048 0.054 d 8.95 9.35 0.352 0.368 e 10.00 10.40 0.393 0.409 g 4.88 5.28 0.192 0.208 l 15.00 15.85 0.590 0.624 l2 1.27 1.40 0.050 0.055 l3 1.40 1.75 0.055 0.069 m 2.40 3.20 0.094 0.126 r 0.40 typ. 0.016 typ. v2 0 8 0 8 16.90 10.30 8.90 3.70 5.08 1.30
docid023247 rev 5 13/14 stpsc6h065 ordering information 14 3 ordering information 4 revision history table 10. ordering information order code marking package weight base qty delivery mode stpsc6h065d stpsc6h065d to-220ac 1.86 g 50 tube stpsc6h065di stpsc6h065di to-220ac ins 2.12 g 50 tube STPSC6H065G-TR stpsc6h065g d 2 pak 1.48 g 1000 tape and reel stpsc6h065b-tr stpsc 6h065 dpak 0.32 g 2500 tape and reel table 11. document revision history date revision changes 18-jun-2012 1 first issue. 31-aug-2012 2 added diode configuration graphic on front page. updated value of q cj and footnote equation in table 5 . 10-oct-2012 3 added max. value in table 3 . 07-nov-2013 4 updated figure 1 , figure 2 , figure 13 , figure 14 , and table 8 . 07-jan-2014 5 added to-220ac ins package.
stpsc6h065 14/14 docid023247 rev 5 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. st products are not designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems with product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchaser?s sole risk, even if st has been informed in writing of such usage, unless a product is expressly designated by st as being intended for ?automotive, automotive safety or medical? industry domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2014 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of STPSC6H065G-TR

	To Download STPSC6H065G-TR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .